HUWA SAN TR50®
BACTERICIDE, FUNGICIDE
Characteristics: Bactericidal and fungicidal disinfectant for surfaces, floors, walls, material and equipments based on stabilized hydrogen peroxide. Product for agricultural use as cleaner, disinfectant and descaler of irrigation systems. It can also be used in organic agriculture. It eliminates biofilms in water systems. Easy handling and dosage. It is biodegradable. Hydrogen peroxide decomposes in water and oxygen. Does not produce foam.
Specifications:Aspect: colourless transparent liquid.
Density: 1,20 ±0,01 gr/cc
Odour: faint odour
Uses: Disinfection of surfaces in agriculture (greenhouses, hydroponics, floriculture, seed producers, etc…). In organic agriculture as cleaner, disinfectant and descaler of irrigation system. Disinfection of surfaces, floors, walls, and equipments in agriculture (greenhouses, hydroculture, hydroponic crops, horticulture, floriculture, seed producers, etc…). It eliminates biofilms in water systems (sprinkles, dip irrigation, circulating water). Disinfection of irrigation water. Disinfection of surfaces of complete greenhouses by vaporization (fogging). Disinfection of surfaces in Food Industry. Disinfection of processing water and internal system of pipes, storage tanks and transport trucks.
Instructions for use: Contact disinfection: Surfaces and equipments by spraying, soaking, brushing or inmersion with the product diluted in water. Clean up before the application of the product.
Disinfection of surfaces, floors and walls: Wash and rinse well the surfaces, floors, walls and equipment. Once clean, spray the surface with the product diluted at 2% for 60 minutes at 6% during 5 minutes. Use the necessary amount to keep the surface wet all the contact time. Then rinse with water until there is no product. Elimination of biofilm: To clean water systems and eliminate bioflm. Fill the system with the product diluted between 1 and 2% (1-2L of product in 100L of water), during a contact time of 1 to 2 hours, or between 0,1 and 0,2% (100-200ml / 100L water), during 24 hours. It is important to fill the system completely with the indicated concentration. This can be controlled in the final tap of the system by means of measuring strips. Let the concentration act during the indicated time, make sure that the system has several points of ventilation because oxygen can be formed during the elimination of biofilm. This water cannot be used for irrigation of crops. Rinse the system with pure tap water until there is no presence of HUWA SAN TR50 in the rinse water in the final tap of the system.
Disinfection of irrigation water: Starting from a clean system, the recommended dose to prevent the growing of microorganism is of 20 to 40 ppm of product (20 to 40 ml per 1000L of water).
For disinfection of equipment and seedbeds nurseries: submerge a product diluted between 1% and 2% for at least 15 minutes and rinse with water. Disinfection by nebulisation (fogging): Apply the product diluted between 3% and 6% with a nebulising devices for at least 1 hour. Make sure nebulization is done and all surfaces to be treated are reached.
Recommendations: Best before 2 years. Keep it stored in its original container, tightly closed, in a constant Ta between 10 and 30oC in a fresh and dry place, away from sunlight and heat sources. Incompatible with alcalis, oxydant agents, reducers, metals, halogens and organic solvents. Make a previous test to verify the compatibility of the product with the materials.
Packing: In litres of bulk, in plastic containers.
Toxicology: Consult material data sheets (MSDS).